Guide: CHoco Sound EMEI Amp Module Upgrade • by Kinki Studio

DISCLAIMER

• Modifications void the product warranty.

• Please do not attempt to modify the unit if you're not comfortable in electronics modification works

---

CHoco EMEI Amp Module Upgrade Kit

Buy Now

Tools Required

• EMEI Amp Module

• Metric Size Allen Key 2.0mm, 2.5mm, 3.0mm, Tweezer

---

Step 1:

Use a 2.0mm Allen Key to loosen seven(7) screws at the bottom panel to dismantle the bottom panel

Step 2:

Pop the bottom panel out, put it safely aside. Identify the old amp module.

Step 3:

Identify the six(6) connectors, remove them gently and carefully

Note: The connectors are fool-proof, do not be worried if you would make a mistaken connecting them in reverse order. They will only fit in one direction

Step 4:

There are total seven(7) screws securing the AMP Module to the chassis. Use a 3.0mm Allen Key to loosen the three(3) larger screws securing the aluminum block (heatsink) to the chassis

Step 5:

Use a 2.5mm Allen Key to loosen the four(4) screws

Note: There are two screws underneath the preamp module, please pay attention to these two screws

Step 5:

Dismantle the old amp module from the chassis

Step 6:

Total seven(7) screws removed along with the old amp module

Step 7:

Use a tweezer to aid inserting the screw to the position on the new amp module

Step 8:

Position the new amp module to the chassis, use a 2.0mm Allen Key to tighten the screw.

Note: Do it carefully as the screw may be out of position. Repeat Step 7 if required

Step 9:

Use a tweezer to install the 2nd 2.0mm screw.

Step 10:

Tighten all the four(4) 2.0mm screws

Step 11:

Insert the three(3) 3.0mm screws, tighten them by using a 3.0mm Allen Key

Step 12:

Connect six(6) connectors to the new amp module

Step 13:

Done! You have completed the amp module upgrade of the CHoco Sound EMEI Integrated Amplifier!

---

Buy Now

CHoco EMEI Amp Module Upgrade Kit

Buy Now

CHoco EMEI

Buy Now